Uncheck the box that allows the computer to turn off the device to save power. Select Network Adapters, and look for your Netgear A6210 Adapter – double-click the device, then select the “Power Management” tab:
Try Some Basic Troubleshooting Steps Firstįirst, try eliminating any problems with your networking configuration:Ĭheck your wireless access point or router to be sure you have the latest firmware (internal software that runs that device).Ĭheck with the manufacturer’s website, and if you’re behind on updates, download and install the latest version.Īnother step you can take is to disable the Minimum Power Consumption setting for your network adapter:Īccess Device Manager by pressing the Start button, and keying ‘device manager’, then select the device manager option: When done with these changes, reboot your computer to make these changes effective. If you have multiple USB root hub entries (you probably will), make this change for each device. Turn off (uncheck) the option that indicates, “Allow the computer to turn off this device to save power”. Select the USB Root Hub, right-click the device, and select Properties, then pick the Power Management tab.
Start Device Manager, and click the arrow to expand the Universal Serial Bus controller devices: If you’ve installed the adapter with a cable extension, be certain the cable is certified as USB 3.0, or the A6210 cannot function as USB 3.0.Īlso avoid longer cables, as this can result in a voltage drop and your adapter not running properly, or not even being recognized by your computer. This will provide the best performance and most reliable connectivity. The A6210’s antenna is designed to work best when positioned at a 90-degree angle with a laptop USB port.
See the steps below for performing Windows Update on the computer where your adapter is failing.
If it works properly with a different computer, that should rule out a hardware problem with the Netgear adapter. If switching the port doesn’t solve the problem, try your A6210 on another computer. Make sure you have the right USB capability that supports the bandwidth you’re trying to obtain from the adapter. If your computer is limited to USB 2.0, you will need to limit your performance to 2.4 GHz. If you’re trying to run at 5GHz, you need USB 3.0 to operate properly. If you’re having intermittent issues, try moving the adapter to another USB port. There could be multiple reasons your A6210 loses connection: 1. Why Your Netgear A6210 Keeps Disconnecting With all that going for the A6210, it would seem like an ideal solution for fast, consistent wireless WiFi performance.Įven so, as with many technical devices, there could be situations where the adapter just disconnects – perhaps intermittently and for no apparent reason.
Netgear is well known for the ease of installing and using their products, including the A6210 wireless adapter: